9.7 Input/output protection
Interference protection is implemented in the M Series to limit
out of band noise carried by the input lines. Disturbing frequencies
can interact with the output stage, causing unpredictable amplifier
behavior. A filtering system is used to stop infrasonic and VHF
signals from entering the signal path.
10 User Maintenance
10.1 Cleaning
Before attempting to clean any part of the amplifier, first
disconnect the AC main source. Use a soft cloth and mild non-
abrasive solution to clean the faceplate and chassis.
WARNING! Never let any liquid reach the internal parts of
the amplifier.
10.2 Service
There are no user-serviceable parts in your amplifier. Refer
servicing to qualified technical personnel. If your amplifier needs
repair contact your Outline dealer. You can also contact the
Outline Technical Service department.
goods covered by product warranty at its sole discretion and as
it deems best.
11.3 Cost and responsibility of transport
The purchaser (or end user/customer) is solely responsible
for all transportation costs and risks associated with sending
warranty covered goods to Outline or its Authorized Service
Center. Outline will assume full responsibility and cover all costs
incurred to send the goods back to the purchaser (or end user/
customer).
10.3 Dust Removal
In dusty environments, the front side air filters clog with dust
after prolonged use. The dust gathered in the filters will interfere
with cooling. You may use compressed air to remove the dust
from filters. To remove air filters please refer to the front panel
removal procedure (see Section 8.1). Air filter cleaning should be
scheduled according to the dust levels in the amplifier’s operating
environment.
11 Warranty
11.1 Product warranty
Outline guarantees its manufactured products to be free from
defective components and factory workmanship for a period of 48
(forty eight) months, starting from the date of purchase printed on
Outline (or any of its Authorized Dealer’s) invoice to the end
customer. All warranty repairs and retrofits must be performed at
Outline facilities or at an Authorized Service Center at no cost
for the purchaser. Warranty exclusion: Outline ’s warranty does
not cover product malfunctioning or failure caused by: misuse,
abuse, repair work or alterations performed by non-authorized
personnel, incorrect connections, exposure to harsh weather
conditions, mechanical damages (including shipping accidents), and
normal wear and tear. Outline will perform warranty services
provided that the product is not damaged during transportation.
11.2 Repair or replacement
Outline reserves the right to repair or replace any defective
12 Power rating
Single-channel mode
Distributed lines
Mono-bridge
mode
4
Ω
8
Ω
70 V
100 V
8
Ω
1250 W
750 W
1000 W
1
1250 W
2
2500 W
1 with an external high pass filter and output voltage limiter.
2 with an external high pass filter.
Outline s.r.l. - Via Leonardo da Vinci, 56 - 25020 Flero (Brescia) - Italy
Tel. +39-30-3581341 Fax +39-30-3580431 — Web Site: www.outline.it E-Mail: [email protected]
11
Professional Amplifier
M5000-4
