OUTLINE S.R.L.
Via Leonardo da Vinci, 56
25020 Flero (Brescia) Italy
Tel.: +39 030.3581341
Fax +39 030.3580431
[email protected]
www.outline.it
3
SERIES DESCRIPTION
Conceived and manufactured to give clients a
flexible and easy to use product introduction to
Outline, the new Ki series brings the engineering
quality, distinctive lines and audio performance
that have made the Italian brand an international
reference point in sound reinforcement. Both Ki10
and Ki12’s compact dimensions, audio performance
and thoughtful design make them ideal solutions for
a wide variety of permanently installed applications.
Ki10 and Ki12 are equipped with 10” and 12” LF
transducers respectively, both of which feature
a 2.5” voice coil for high power and reliability. A
1.5” diaphragm compression driver provides the
HF reproduction. The Outline-designed passive
crossover networks fitted to both models also make
them very efficient in terms of amplifier channels
and external control.
Both products also feature another Outline first,
a brand new design of rotatable waveguide. Many
comparable loudspeakers offer this facility but
Outline’s Ki-series are the first to allow the installer
to quickly and easily rotate the entire horn and HF
section without any disassembly of the loudspeaker.
This piece of original engineering offers a real
advantage in small rooms or those with low
headroom, as the HF horn can be quickly adjusted
to ensure the required dispersion (100° x 50° or 50°
x 100°) regardless of the orientation of the cabinet.
OPERATION (ROTATABLE HORN)
It is possible to rotate the Ki’s horn without
removing the front grille. Just unlock the four screws
and spin the wheel using the two openings on the front
of the speaker. Then retighten the screws to lock the
horn in the new position. Please note that when the
horn is in vertical position it is shown through four
dedicated red dots in the openings (one on each side
as shown in the figure below).
Red Dots
