En-10
1-888-514-1663 |
WWW.OUTLANDLIVING.COM
SECTION 10:
APPLIANCE DIMENSIONS
(Approximate)
SECTION 9:
APPLIANCE MAINTENANCE
Your Outland appliance requires periodic maintenance to keep
it in good running order. Follow the steps below to ensure your
appliance will provide you with the best possible performance:
1 Keep your appliance out of the rain and store it in a dry place.
2
If you experience any signs of your propane cylinder ‘freezing
off’ or start to experience lower flames than usual, please
simply turn the burner control setting to low for 5–10 minutes,
or replace the cylinder with a full one.
3
Ensure that you clean the top of your Outland appliance after
every use to keep it looking GREAT. Simply use warm soap
water to wipe down your appliance to keep it clean. Do not use
abrasive cleaners.
4. Should any part of this appliance (including the burner)
become soiled or dirty, wipe lightly with a damp cloth. Do not
use flammable or corrosive cleaning products on or near this
unit.
5
Periodically clean the burner orifice holes out with a small pin.
a. Remove top screw
b. Remove Burner Screen
c. Locate burner
d. Clean burner and burner screen orifice holes with small pin
or paperclip.
Torch Head
Wind
Guard
Burner
Burner
Orifices
Burner
Screen
Top Screw
7
0.
5” +
/- .
2” (
1.
79
m +
/- 5
m
m
)
S
TA
N
D
IN
G
H
EI
G
H
T
Ø 34” (Ø 862mm)
TRIPOD FOOTPRINT DIA.
TOP
FRONT
