Instructions
MOUNTING
THE
TENT
ON
YOUR
VEHICLE
WARNING!
• If
you
have
any
back,
knee
or
any
other
health
complications,
do
NOT
attempt
to
mount
the
t
ent
on
your
vehicle.
• Your
vehicle
MUST
have
a
roof
rack
or
cross
bars
installed
in
order
to
mount
the
tent.
• The
cross
bars
MUST
have
a
dynamic
weight
load
of
at
least
160
lbs
and
MUST
be
at
least
30”
(76cm)
apart.
It is easiest to mount the tent from the side of your vehicle, not from the front or the back.
1.
Have
two
people
stand
at
the
front
of
the
tent,
and
two
people
at
the
back.
2.
Grab
the
panel
on
the
bottom
of
the
tent
and
lift
up
to
your
waist.
3.
Lift
the
tent
up
to
your
shoulders,
and
then
above
your
head.
4.
Gently
slide
the
tent
onto
your
cross
bars.
5.
Make
sure
the
tent
is
centered.
INSTALLING
THE
MOUNTING
BRACKETS
IMPORTANT:
WHEN
MOUNTING
THE
TENT
ON
YOUR
VEHICLE,
MAKE
SURE
THAT
EACH
BRACKET
IS
SECURELY
FASTENED.
FAILURE
TO
DO
SO
COULD
CAUSE
DAMAGE,
INJURY
OR
DEATH.
NOTE:
apply
lubricant
to
the
bolts
and
nuts
before
tightening
to
reduce
the
risk
of
thread
galling.
1.
Unwrap the two attachment rails from packaging and slide 3 A nuts into top slot of each rail.
2.
With tent unfolded, have one person hold attachment rail up to the floor of the tent with the 6 holes pre-drilled.
3. The other person will then place bolts and washers (B) through the tent floor and fasten to attachment rails.
(See
image below)
