1
2
3
Set-up instructions
TIP
Siliconized tents do not have
tape-sealed seams. They are
sewn with special thread, that
expands upon contact with
water and seals the tent. In
very wet conditions, we also
recommend the use of liquid
seam sealant on the inside of
the outer tent before use.
Apply it with a fine brush and
allow to dry thoroughly.
Clean the ground of sharp rocks and
other debris. Spread the inner tent on
the ground, put the rod in the eyelets
at the edge and attach the inner tent
with the hooks on the rod. Fix the
inner tent into the ground with tent
pegs.
Slip the outer tent over the inner tent
and fix it with the inner velcro tapes.
Tighten the tent with the remaining
pegs. Tighten it again later if
necessary.
The video for this product
can be found at:
www.outdoorer.com/videos
Trek Escape 2
