Outdooree R6, Руководство пользователя

Страница: 40 / 44

Photos Do Not Capture Subject of Interest
1. Check the “Sensor Level” (PIR sensitivity)
parameter setting. For warm environmental
conditions, set the Sensor Level to “High” and
for cold weather use, set the sensor for “Low”.
2. Try to set your camera up in an area where
there is not a heat source in the camera’s line
of sight.
3. In some cases, setting the camera near
water will make the
camera take images with
no subject in them. Try aiming the camera over
ground.
4. Try to avoid setting the camera up on small
trees that are prone to being moved by strong
winds.
5. Remove any limbs which are right in front
of the camera lens.
PIR Sensor LED Flashes/Doesn’t Flash
1. When the camera is in the SETUP mode, a
special LED on the front of the camera will
flash when it senses motion. This is for setup
39