background image

 

Note: It’s takes about 3 hours to fully charge the ODT Big Turtel Shell. 
           

3.CONNECT 

3.1:Pair the first devie 
Power on ODT Big Turtle Shell then it will in the pairing mode 
Prepare your phone or device—Turn on Bluetooth 
    iPhone,iPod, or iPad: Settings > General > Enable Bluetooth 
    Andriod: Settings > Wireless& Networks > Bluetooth Settings 
    Blackberry: Settings/Options > Bluetooth >Enable Bluetooth 
    Other Cell Phones: Review the instruction manual that came with your phone or Google it. 
 
3.2Pair the second device 
Press both << and >> buttons for 3s, then will hear “ pairing”. 
After  successfully  paired  with  second  device,  reconnect  the  first  device  by  hand  then  the  two 
device will be successfully paired at the same time. 

 

3.3      Pairing by NFC 
3.3.1. Turning on the ODT Big Turtel Shell and then enter into the paring mode. 
3.3.2. Prepare your NFC supported device and swipe the NFC area in the ODT Big Turtle Shell to 
detect the device and then it will complete the paring automatically. 

 

4. LISTEN 

 

The ODT Big Turtle Shell is built to go anywhere, but for optimal sound quality follow the steps 
below: 
>Make sure ODT Big Turtle Shell is resting on its base and facing upwards 
>When  connected  wirelessly  via  Bluetooth,  it’s  best  to  turn  the  volume  on  your  phone/device 
fully up and when use the volume control (<< / >>) on the ODT Big Turtle Shell 
>When  connected  via  3.5mm  stereo  input,  your  phone/device  may  distort  the  audio  signal  if 
turned up too loud, Turn down the volume on your phone/devide before adjusting the volume on 
ODT Big Turtle Shell. 
 
Note: 3.5mm Audio in and Audio out to another ODT Big Turtle Shell is supported 
 

5.TALK:   

The  built  in  microphone  means  that  the  ODT  Big  Turtle  Shell  can  be  used  as  a  wireless 
speakerphone. Just speak in direction of the top grill 
*NOTE : The built-in microphone only works when connected via Bluetooth 
 
>Answer or end a call: Press the multifunction button to answer or end a call. 
>Decline a call: Press and hold the multifunction button for 2 seconds 
>Make a call: Use your phone to dial as usual. Listen and talk through the ODT Big Turtle Shell 

Содержание ODT BIG TURTLE SHELL






Отзывы: