Outdoor Tech BUCKSHOT PRO, Инструкция по эксплуатации

Страница: 9 / 16

PAIRING MODE
Enter Pairing Mode
When powered on, it will enter into pairing mode
automatically. Hold the MFB for 2-3 seconds or
until you see the LED light flash blue and the voice
prompts states “Power on, Pairing.” The LED lights
will then flash red and blue alternately.
Pairing BUCKSHOT PRO to Device
Open the Bluetooth settings on your device. If
you have put your BUCKSHOT PRO into pairing
mode, it should be listed as “ODT BUCKSHOT
PRO” as an available device to pair. Connect
with the BUCKSHOT PRO. The voice prompt will
state “Successful” if the BUCKSHOT PRO and your
device connected. The blue LED light will flash
for as long as the device is connected and on.
Power On / Off
ON: Hold the MFB for 2-3
seconds or until the LED
light flashes blue and
the voice prompt states
“Power on”
OFF: Hold the MFB for
3-4 seconds or until the
LED light flashes red and
the voice prompt states
“Power off”
*The BUCKSHOT PRO will automatically repair to a previously
paired device.