ASSEMBLY TIPS & TRICKS
OUTDOOR ORDER™ LLC.
“bringing order to the outdoors”
| TORRANCE, CA | 888.806.8836 | [email protected] | WWW.OUTDOORORDER.COM
DO NOT
OVER-
TIGHTEN POLE
BOLTS TO THE BASE
POLE MOUNT AS IT
WILL CAUSE POLES
TO LEAN WHEN
FULLY ASSEMBLED
AND CUSTOMERS
WILL ASSUME UNIT
IS DEFECTIVE!
Insert lower pole (4) into the
base pole suppor�ng mount
(6), affix it with 6 pcs [5mm
washers] (14) and 6 pcs [M5
x 12 bolts]
IF HEATER DOES NOT
IGNITE- TRY CHANGING
THE BATTERY FIRST!
Remove igniter bu�on by turning counter-
clockwise. Install "
AAA
" size ba�ery with
posi�ve terminal up as indicated in diagram.
Replace igniter bu�on.
DO NOT USE A POWER
TOOL FOR THIS STEP!
