Step
9
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 12
Rear
Optional:
Your Raised Garden Bed will have an extra
Part H - Bed Rib Frame (Rear).
This piece can be
used as a support to turn your Rear Trellis into a
shelf. To do this, Part H will need to be cut down from
29 1/4” length to approximately 12 5/8”. Check the
measurement before you cut.
Be careful not to load anything too heavy onto this
shelf if you choose to use the Rear Trellis this way.
Attach shelf support with
3 - 2 1/2” Screws
left over
from your Raised Bed kit.
Note:
Pre-drill
pilot holes to
prevent splitting.
