manualshive.com logo in svg

Outdoor Lifestyles CARODG36I, Руководство пользователя

Поделиться
Скачать
Outdoor Lifestyles CARODG36I Скачать руководство пользователя страница 29

 

Outdoor Lifestyles by Hearth & Home Technologies Inc.  •  Carolina •  4066-300  •   Rev. Z  •  11/13 

29

Although the frequency of appliance servicing and maintenance will depend on use and the type of installation, a quali

fi

 ed 

service technician should perform an appliance check-up at the beginning of each heating season.

Annual inspection by qualified technician 
recommended.

Check:

WARNING

11 

11 

Maintaining and Servicing the Appliance 

Risk of injury or property damage
Before servicing:

•  Turn off gas.
•  Turn off electricity to appliance.
•  Disable remote control, if one is present.
•  Ensure appliance is completely cooled.

WARNING

Clean:

After Servicing:

•  Replace any screen or barrier that was 

removed.

•  Condition of screen doors.
•  Obstructions of combustion and ventilation 

air.

•  Condition of logs.
• Condition 

of 

fi

 rebox.

•  Burner ignition and operation.

•  Air passageways, control compartment.
•  Burner, burner ports.

Risk of:

•

 

Fire

•  Delayed ignition or explosion
•  Exposure to combustion fumes
• Odors

The logs, pilot assembly and front of appliance should be 
checked periodically for accumulation of soot. Clean pilot 
and front thoroughly with a cloth.  Logs may be vacuumed 
gently.

Содержание CARODG36I









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды