www.desatech.com
120948-01A
9
rEPLacEMENT ParTS
WARNING: Use only original
replacement parts. This heater
must use design-specific parts.
do not substitute or use generic
parts. Improper replacement
parts could cause serious or fa-
tal injuries. This will also protect
your warranty coverage for parts
replaced under warranty.
PARTS UNdER WARRANTY
Contact authorized dealers of this product. If
they can’t supply original replacement part(s),
either contact your nearest Parts Central or
call DESA Heating Products’ Technical Ser-
vice Department at 1-866-672-6040.
When calling DESA Heating Products, have
ready
• your name
• your address
• model number of your heater
• how heater was malfunctioning
• purchase date
PARTS NOT UNdER WARRANTY
Contact authorized dealers of this product. If
they can’t supply original replacement part(s),
either contact your nearest Parts Central (listed
in Authorized Service Center booklet) or call
DESA Heating Products at 1-866-672-6040
for referral information.
When calling DESA Heating Products, have
ready
• model number of your heater
• serial number of your heater
TEcHNicaL SErvicE
A heater which is not working right must be
repaired, but only by a trained, experienced
service person. To find the service center
closest to you, or if you have further ques-
tions about this heater, contact DESA Heat-
ing Products’ Technical Service Department
at 1-866-672-6040. When calling, please
have your model and serial numbers of your
heater ready.
You can also visit DESA Heating Products’ Tech-
nical Service web site at
www.desatech.com
.
You may also obtain in-warranty or out-of-
warranty service by taking the product to your
local service center.
STOraGE
1. Allow at least 45 minutes for heater to cool
down after using.
2. Disassemble heater in reverse order that
it was assembled.
3. Place all hardware in provided tool bag.
4. Store unit in bag until ready to use again.
SErviciNG
To assure safety, proper function and lon-
gevity of the heater, regular maintenance is
required. The frequency of maintenance will
depend on the usage of the unit. Review the
following concerning the criteria for a properly
functioning heater. Failing to follow proper,
regular maintenance will void warranty.
A hazardous condition may result if a heater
is used that has been modified or is not func-
tioning properly. When the heater is working
properly:
• The flame is contained within the heater.
• The flame is essentially blue with some
yellow tipping.
• There is no strong disagreeable odor, eye
burning or other physical discomfort.
• There is no smoke or soot internal or ex-
ternal to the heater.
• If your heater will not light or stay lit, contact
a qualified service person.
The parts lists and wiring diagram show
the heater as it was constructed. Do not
use a heater which is different from that
shown. In this regard, use only the hose,
regulator and cylinder connection fitting
(called a POL fitting) supplied with the heater.
IMPORTANT:
Do not use alternates. For this
heater, the regulator must be set as shown in
Specifications,
page 2. If there is any uncertainty
about the regulator setting, have it checked.
