9
CF-SPARKER Installation
CF-SPARKER will not operate correctly without an ignition
and
ground
wire attached.
Plug both
BLACK
wires hanging from the burner into the back of
the sparker box.
Before turning on gas, test CF-SPARKER by pushing the button
on the igniter
. Consult the troubleshooting section of the
Crystal Fire Owner’s Manual if the spark is weak, intermittent,
or not present.
1.
Make sure the valve is in the
OFF
position before beginning.
2.
Install CF-SPARKER as shown, using
a AAA battery (not included).
Negative end should be placed
inside the CF-SPARKER, positive
end outside of the CF-SPARKER.
OFF
