outdoorrooms.com
4
SETTING UP YOUR BURNER
ATTENTION
Read and understand your Crystal Fire® Plus owner’s manual before
beginning burner hookups or using the device.
DO NOT USE TEFLON TAPE OR PIPE DOPE ON FLARE FITTINGS.
3.
•
For hard piped installations. Connect the gas supply line (
not included
) to the
3/8” male flare fitting on the valve.
USE TWO WRENCHES TO ENSURE A GAS
TIGHT CONNECTION.
•
Run gas pipe up through the opening between the 2 base plates as shown in
the image below.
!
!
A. GAS CONNECTIONS
•
See Crystal Fire
®
Plus instructions for burner installation.
•
All gas connections were completed at the factory.
•
Check all connections for leaks. If needed, tighten connection with 2 wrenches
and re-check for leaks.
• Attach included control valve knob to control valve stem.
