Outdoor GreatRoom Company CV-30-E, Руководство по установке

Страница: 6 / 12

6
CF-SPARKER Installation
Gas Connections
Read and understand your Crystal Fire® Plus Burner Owner’s
manual before beginning burner hookups or using the device.
Do not use Teflon tape or pipe dope on flare fittings.
 Locate CF-SPARKER inside of crystal fire burner box.
 Remove CF-SPARKER cap and hex nut. Insert AAA battery
(not included) with + end out.
 Install CF-SPARKER into control panel as shown below.
 Depress CF-SPARKER button to test your sparker.
Locate and orient
sparker box on
control panel as
shown. Sparker box
must be installed
before burner valve.

See Crystal Fire® Plus instructions for burner installation.
 All gas connections were completed at the factory.

Check all connections for leaks. If needed, tighten connection
with 2 wrenches and re-check for leaks.

Attach burner valve to control panel with provided screws as
shown below. Ensure sparker box is installed before this step.