42448 The Wave Burner Series REV B 8-2-16
Inspect
Maintenance Tasks
Burner Assembly
1
Remove decorative glass and examine burner. Vacuum and wipe
out as needed. Use caution when cleaning these areas
2
Inspect for warping and corrosion. Repair as necessary
3
Check the hose connecting the LP or natural gas supply to ensure it
is not damaged. Replace as necessary.
4
Verify air shutter area is clean
Burner Ignition and Operation
1
Verify all gas connections are tight and leak-free
2
Clean burner tube, inspect for plugged ports, corrosion, or
deterioration. Replace burner if necessary.
3
Inspect for flame problems.
4
Verify air shutter is clear of dust and debris and is in correct
position for the gas type being used.
5
Inspect orifice for soot, dirt, or corrosion
6
Verify manifold and inlet pressures. Adjust regulator as required.
WARNING
It is imperative the burner be kept clean
9
Service and Maintenance
Although the frequency of appliance servicing and maintenance will
depend on use and the type of installation, a qualified service
technician should perform an appliance check-up annual.
Storage of an appliance indoors is permissible only if the cylinder is
disconnected and removed from the appliance.
The use of a vinyl table cover is highly recommended to keep your
table and burner looking new and ensuring extended trouble-free
operation.
Maintenance and Service Tasks
For service calls: Contact the dealer your product was purchased from first.
Contact the Outdoor GreatRoom Company at 1-866-303-4028 if further assistance is needed.
