11
After installing igniter and making gas connections, verify that
all connections are tight and that no leaks are present using a
solution of soapy water or a commercially available leak-check
solution.
Position Your Tank
(if applicable)
1.
Remove door, connect the propane hose/regulator to the
propane tank and hand tighten (DO NOT USE A WRENCH) and
slide the propane tank past the dotted line to ensure the door
closes properly.
2.
With the tank inside, ensure that no hoses, wires, or any other
components are kinked or touching the burner pan.
Care and maintenance note:
Light scratches may be removed from the poly-wood surfaces
of this fire pit by gently sanding with 220-grit sandpaper in the
same direction as the grain. Sanding too deeply or not
following the grain of the material could result in permanent
damage.
