8
Set burner into the fire pit base as shown below
Sparker
Sparker will not operate correctly without an ignition
and
ground wire
attached.
Sparker will not operate correctly without an ignition
and
ground wire attached.
Plug both
BLACK
wires hanging from the burner into the back of the
sparker box. If an orange wire is present, do not use it. The orange
wire is for automatic ignition system add-on only.
Test system by pushing the button on the igniter. Consult the
troubleshooting section of the Crystal Fire Burner Owner’s Manual, if
the spark is weak, intermittent, or not present.
Igniter Installation (continued)
