Outdoor GreatRoom Company BRON52-K, Руководство по установке

Страница: 7 / 16

outdoorrooms.com 6
4.
Unpack burner.
Before installing the burner into the burner plate,
remove the 24 inch flex line between burner oriface and valve and
connect included 34 inch flex line.
Use 2 wrenches to tighten and
perform leak test. Set burner into burner plate.
Position burner plate in center of fire pit and then pull plate so that end
is slightly off edge. Leave a gap bewteen control panel block and
burner plate so that hands are able to fit and make connections outlined
in future steps.
WORKABLE GAP
BURNER PLATE
AND BURNER