Outdoor GreatRoom Company BC-20-MNB, Руководство по установке

Страница: 5 / 12

5
Read and understand your Crystal Fire® Plus owner’s manual before beginning
burner hookups or using the device. Do not use Teflon tape or pipe dope on flare
fittings.

• See Crystal Fire® Plus instructions for burner installation.
o
All gas connections were completed at the factory.

Check all connections for leaks. If needed, tighten connection with 2
wrenches and re-check for leaks.

Attach burner valve to control panel with provided screws as shown below.
Ensure sparker box is installed before this step.
Gas Connections
5.
Caution:
Top is heavy, two people are required to lift and set into place.
• Remove burner cover before lifting the top to
avoid damage to the cover.
• Carefully lower top onto base. Position top so
it is centered on top of the base.
Supercast Top Placement
4.
Refer to this step for grey table bases with Supercast Tops: (BC-20-WO, BD-20-WO)