Outdoor Gourmet SRGG51607, Инструкция по сборке и руководство пользователя

Страница: 17 / 35

STEP 12
Route the electrode wire through the right panel of
cabinet; connect the electrode wire to the pulse
igniter by firmly pushing the electrode wire terminal
onto the igniter terminal connector as illustrated
(Position A).
Put 2 pcs D batteries (not included) into the battery
compartment as shown in the picture.
Note the positive and negative electrodes direction.
Replace batteries in the battery compartment:
Turn the control knob of the battery compartment
assembly counter-clockwise to "ON" position, open
the battery compartment lid.
Put 2 pcs D batteries in or out as shown in the
picture.
N
For battery removal, push the tab on battery
compartment assembly outward. This should
assist in releasing the battery and allow you
quickly change out.
ote the positive and negative electrodes direction.
Cover the battery compartment lid, and turn the
control knob clockwise to "OFF" position.
STEP 11
Fig.11
Foldable left side table operation
1. To raise left side table (17), lift left table up
with two hands until folding mechanisms lock
into place while you will hear two click sounds
as shown in Fig.11.
2. To fold down left side table, press up the
front and back folding mechanisms levers to
release left side table as shown in Fig.11.
WARNING: Be careful when folding the left side
table to avoid hand pinching.
17
Folding
Mechanism Lever
Folding
Mechanism
Electrode
Wire Terminal
D Battery 2 pcs
7
ab on battery
compartment assembly
(not included)
10
Battery
Compartment
Control Knob
Position A
Electrode Wire
ASSEMBLY INSTRUCTIONS
17