(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired
operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Getting Started
Step 1) Know your watch:
Push button location:
Push button Function:
S1 –
Start / Lap /
+
S3 –
View / OK
S5
– Stop / Save /
-
S7 –
Mode / Exit
S11
– Light / Set
Note: Actual color of the watch and artwork may vary from style to style, this is for reference only.
Step 2) Charging the Battery:
Charge the unit for about 4.0 hours before first use. The length of time for a fully charged battery will last depending on the
actual usage. It is recommended to regularly re-charge your battery every 1-2 months even if it is not used to maintain good
battery condition.
2.1)
Plug your USB PC link cable to your PC
2.2)
Align the charging clip with the contacts on the back of the watch.
