Disassembly
Packing the tent
Step 7 : Secure guy lines
1) Secure tent using all guy lines and stakes.
Tent must be secured for proper
function.
Step 5 : Stake tent
Fully assembled
Step 6 : Attach fly
Tent must be completely guyed out to
prevent rain water from pooling on
the roof/fly causing frame damage.
CTC201009-1 7/19
1) Stake down the tent by inserting a stake through the stake loops, located along the
perimeter of the tent.
2) Make certain the tent floor is pulled out evenly and tightly.
3) Hammer the stakes into the ground at a 45˚ angle using a hammer or mallet.
1) Unfold the fly and place over the tent. Position the fly with logo at the side of the tent.
2) Attach hook and loop tabs on the underside of the fly to the frame.
3) Attach S-hooks on the fly to D-rings on the leg poles.
1) To take down the tent, disassemble in
reverse order.
2) Remove accessories and items from inside
and outside the tent.
3) Remove and fold fly.
4) Be sure to leave doors and windows
unzipped to avoid zipper damage.
5) Remove stakes with hammer or stake
puller. DO NOT pull on tent.
6) Carefully disengage poles from pins.
Carefully push pole away from you through
the sleeve to minimize risk of damage to
tent or poles.
7) Store stakes in bags provided.
1) Spread tent flat, distribute evenly.
2) Fold into quarters not to exceed the length
of pole bag.
3) Lay pole bag at opposite end from door.
Tightly roll bag, tent and fly forcing air
through unzipped door.
4) Secure with ties and place in carry bag with
stakes and accessories.
5) Tent must be clean and dry before storage.
Store off concrete floor.
Be certain campfires are extinguished.
Dispose of trash appropriately.
Dimension A should
be close to but not
exceed the length
of the pole bag.
A
Fold tent into a
rectangular shape.
Front of tent
(door unzipped)
Made in Bangladesh
Imported by Trileaf Distribution Trifeuil Toronto,
Canada M4S 2B8
3
2