UNPACKING
CAUTION:
Obtain the aid of an assistant when
handling large or heavy grill components.
1. Once the top of shipping box is open, obtain
the aid of an assistant and lift the cardboard
sleeve up over Firebox and components.
2. Use sleeve as a work surface to protect floor
and grill parts from scratches.
3. Remove all packing materials from around grill
exterior.
4. Open both Firebox lids and remove packing
materials and components inside each Firebox
chamber.
Assembly
Latch
5. Open the four latches as below.
6. With the help of an assistant, lift the firebox (A)
away from the cart assembly (B) separating the
two pieces. Remark: the lighting stick is
preassembled on the cart leg
7. Attach the wheel axle (F) through the cart
legs, as shown below picture, then attach the
two wheels (E) with two M12 nuts (CC), and
attach two wheel caps (D) with two 1/4-in. x 12-
mm round head screws (DD) and two1/4-in flat
washers (EE) at the end of the wheel axle (F).
8. Attach the swivel casters (I) and swivel caster
with brake (H) using eight 1/4" x15 mm round head
screws (AA) with 1/4-in lock washer (FF), four for
each caster. Ensure the swivel caster with brake
（
H) is at the front of the cart frame. Tighten the
eight screws.
H
I
AA
FF
5
F
CC
D
DD
CC
D
DD
E
EE
