background image

21 

Open  the  gas  control  valve  on  the  gas 
bottle or regulator. 
Insert  lit  match  through  the  right  match-
lighting  hole  on  the  right  side  of  the 
barbecue  body  and  place  near  rightmost 
burner porthole. 
Push  and  turn  the  rightmost  control  knob 
anti-clockwise  to  the  high  position,  taking 
care to protect yourself from the flames. 
When  the  right  burner  is  lit,  turn  the 
remaining burners on from right to left. 
Confirm  that  each  burner  is  alight  before 
turning on the next burner. 
If a burner fails to ignite, contact your local 
dealer for assistance. 
After  ignition,  turn  the  burners  to  the  high 
position for 3-5 minutes in order to pre-heat 
the  barbecue.  This  should  be  done  before 
each  cooking  session.  The  hood  or  lid 
should be open during preheating.  
After  completion  of  preheating,  turn  all 
burners to the low position for best cooking 
results. 

 

8.5. Lighting the Side Burner  

Raise the side burner hood or lid. Push and turn 
the  side  burner  control  knob  anti-clockwise  to 
the high position. Push the ignitor button rapidly 
until  the  side  burner  ignites.  If  the  side  burner 
fails  to  ignite,  turn  the  control  knob  to  the  OFF 
position and wait five minutes before attempting 
to  re-light following  the  above  procedure.  If  the 
side  burner  still  fails  to  ignite,  turn  the  control 
knob off, wait five minutes and light with match. 

 

When  using  the  side-burner,  care  should  be 
taken to ensure that pans are central and flat on 
the side-burner grid. 

 

8.6. Grill Cooking 

The burners heat up the flame tamer / lava rock 
underneath  the  grill,  which  in  turn  heats  the 
food  on  the  grill.  The  natural  food  juices 
produced during cooking fall onto the hot flame 
tamer  /  lava  rock  below  and  vaporise.  The 
subsequent  rising smoke  bastes  the food,  as  it 
travels  upwards,  imparting  that  unique 
barbecued flavour.  

 

8.7. Griddle Plate Cooking 

The  burners  heat  the  griddle  plate  directly, 
which  then  cooks  the  food  on  contact.  Griddle 
plates  allow  for  the  cooking  of  smaller  items, 
such  as  seafood,  which  could  fall  through  the 
spaces  of  a  grill.  They  are  also  suitable  for 
cooking  items  that  require  high-temperature/
short-duration cooking, such as vegetables and 

smaller cuts of fish. Similarly, it can be used in 
exactly  the  same  way  as  a  griddle  in  the 
kitchen,  for  searing  steaks,  cooking  eggs,  etc. 
Alternatively, it can be used for heating pans or 
keeping food warm. 

 
8.8. Roasting Hood Cooking  

Barbecues  equipped  with  a  roasting  hood  give 
the  option  to  form  an  ‘oven’  for  roasting  or 
baking  food,  such  as  joints  of  meat  or  whole 
chickens,  etc.  More  even  cooking  of  food  will 
actually be achieved by using the barbecue with 
the hood down. 

However, this should only  be 

done with the burners on low.   

 
For  best  results,  place  the  food  you  wish  to 
bake or roast on a  metal baking tray and set it 
on one side of the cooking grill.  
 
Turn  the  burner  directly  under  the  food  to  the 
OFF  position  and  turn  all  other  burners  to  a 
LOW to MEDIUM position. 
 
Close  the  hood  to  cook  the  food  ‘indirectly’. 
Avoid  lifting  the  hood  unnecessarily  as  heat  is 
lost every time the hood is opened. If the hood 
is  opened  during  cooking  please  allow  extra  
time  for the  barbecue  to  regain  its  temperature 
and complete the cooking. Use the temperature 
gauge  (if  applicable) to  monitor the  heat  of  the 
barbecue. 
 
If  the  internal  heat  becomes  too  high,  turn  the 
burners  down  to  the  low  position.  It  is  not 
necessary  or  advisable  to  have  all  of  the 
burners on high when the hood is closed. 
 
DO  NOT  ALLOW  YOUR  BARBECUE  TO 
OVERHEAT. Take care when opening the hood 
as hot steam can be released on opening. 
 

8.9. Warming Rack (where supplied) 

Warming  racks  are  a  convenient  way  to  keep 
cooked  food  warm  or  to  warm  items  such  as 
bread  rolls.  It  is  advisable  to  place  food 
(particularly  fatty  foods)  to  the  front  of  the 
warming  rack  to  avoid  the  possibility  of  juices 
and  fat  running  down  the  back  of  your 
barbecue. Always check that your warming rack 
is properly fitted before use. 

 
8.10.  Rotisserie  Operating  Instructions 
(Optional accessory, hooded models only) 

1.  Carefully remove the cooking surfaces and 

the warming rack (where supplied) from the 
barbecue. 

2.  If  applicable, slide  the lava  rock in  baskets 

to  the  centre  of  the  barbecue  body.  It  is 

Содержание THG3710SS-3


























Отзывы: