SOLUTION
CAUSE
PROBLEM
Lack of fuel
Spark point
dirty
Replace gas
cartridge
Wipe off dirt
Faulty ignition
system
Reset
correctly
9
10
OUTBACK SG-930 USER MANUAL
OUTBACK SG-930 USER MANUAL
LEAK TESTING
High pressure
in gas
cartridge
Request for
inspection
or service
Low
flame
Can
not
ignite
Can
not
burn
Unstable
flame
Uneven
flame
Gas
leak
Flame
extinguish
automatically
Continued
burning
after
turning
of
f
Spark point
not in position
Obstruction
in burner
Cool down
gas cartridge
Use of
unsuitable
fuel
Use of
correct fuel
imperfect gas
cartridge
alignment
Clean the
burner
LEAK TESTING
Step 1 -
Step 2 -
Step 3 -
Step 4 -
Step 5
Step 6 -
Confirm control knob is in the OFF position.
Install the gas cartridge in position.
Push the gas cartridge lock down.
Check for leaks by brushing a solution of ½ water and ½
liquid detergent / soap over all the gas system joints, including all
valve connections, hose connections.
- NEVER USE AN OPEN FLAME to test for leaks at any
time.
If bubbles form over any of the joints there is a leak.
urn off the gas supply at the gas bottle
Re-tighten all joints
Repeat test
If bubbles form again do not use the barbecue and contact your
local Outback distributor for assistance.
The following linedrawing is for easier test for your reference.
·
·
·
T
Always perform a leak test in a well-ventilated area. Always wipe
the mixed solution (½ water and ½ liquid detergent / soap) from
all connection after leak test.
Functioning of
safety stop
mechanism
Check and
reset gas
cartridge
Reset spark
point, keep
2mm from
burner
Testing Position
Testing
Position
Testing Position
TROUBLESHOOTING
In the unlikely event that you experience problems with this barbeque, please contact:
Customer Service Outback UK Unit 2 Farleigh Hill Tovil Maidstone Kent ME15 6RG
Tel: 01622 671771 Fax: 01622 673101
e-mail:
website:
www.outbackuk.com
