10
12
11
Phoenix 4 Burner Black / Stainless Steel
Electronic Ignition Assembly Diagram
Connect the wires to the electronic ignition
assembly as shown in the diagram to the
right.
Insert the electronic ignition battery (not sup-
plied) into the battery compartment, ensuring
the battery is correctly installed according to
the (+) (-) markings.
Connect the gas hose to the Side Burner Shelf (C1) as shown.
Ensure the mating faces of the connection are clean and not damaged. Do not use any
sealing tape, paste, or liquid on the connection. The nut must be tightened with the use
of a spanner. Do not use force which may damage the assembly.
Black
9V Battery
(not included)
Black Wires
(With Large Leads)
Wire
Switch
Black
Black
Black Black
