Outback OUT370663/PH500 Скачать руководство пользователя страница 9

- 5 -

A. Construction and characteristics

Transportable terrace/garden heater with tank housing.

Casing in steel with powder-coating or in stainless steel.

Gas hose connections with metal clamp (screw caps for Germany). 

Heat emission from reflector.

B. Specifications

Use propane,butane or their mixtures gas only.

Max. wattage: 11000 watts 

Min. wattage: 5000 watts 

Consumption:

The hose and regulator assembly must conform to local standard codes.

Regulator outlet pressure should meet the corresponding appliance category in B. Specification.

The appliance requires approved hose in 0.6m length. 

Using the proper regulator according to outlet pressure of regulator as showed in the table above.

C. Table of injector

APPLIANCE CATEGORY:

TYPES OF GAS:

Butane                 Propane

GAS PRESSURE:

28-30mbar           37 mbar           30 mbar                     50mbar                     37mbar

TOTAL HEAT

INPUT

(Hs): (Qn)

11kW (G30:800g/h; G31:786g/h)

INJECTOR SIZE:

The marking

ˈ

 for example

ˈ

 1.70 on the injector

ˈ

indicates that the size of injector is 1.70mm

1.70 mm for main burner
0.22 mm for pilot burner

1.35 mm for main burner
 0.22 mm for pilot burner

1.48 mm for main burner
0.22 mm for pilot burner

APPLIANCE CATEGORY:

TYPES OF GAS:

Butane                  Propane

GAS PRESSURE:

28-30mbar            37 mbar          30 mbar                     50mbar                     37mbar

30mbar                 37 mbar          30 mbar                     50mbar                     37mbar

Butane, propane 
or their mixtures

Butane, propane 
or their mixtures

Butane, propane 
or their mixtures

Butane, propane 
or their mixtures

Butane, propane 
or their mixtures

Butane, propane 
or their mixtures

OUTLET PRESSURE 
OF REGULATOR:

3+(28-30/37) 

I

I

3+(28-30/37) 

I

I

3B/P(30)

I

3B/P(30)

3B/P(50)

I

3B/P(50)

I

3B/P(37)

I

3B/P(37)

Содержание OUT370663/PH500


















Отзывы: