12
Leak Test Diagram
ASSEMBLY IS NOW COMPLETE.
PROCEED TO THE NEXT PAGE FOR INSTRUCTIONS ON OPERATION AND MAINTENANCE
ALL JOINTS AND CONNECTIONS MUST NOW BE
LEAK TESTED
BEFORE USING THE
BARBECUE.
Leak test annually, and whenever the gas bottle is removed or replaced.
Leak Testing
Always perform a leak test in a well-ventilated area.
Step 1 -
Confirm all control knobs are in the off position.
Step 2 -
Turn the gas on / open the gas control valve on the gas bottle or regulator.
Step 3 -
Check for leaks by brushing a solution of ½ water and ½ liquid detergent / soap over all the
gas system joints, including gas bottle valve connections, hose connections, and regulator
connections.
Step 4
-
NEVER USE AN OPEN FLAME to test for leaks at any time.
Step 5 -
If bubbles form over any of the joints there is a leak
•
Turn off the gas supply at the gas bottle
•
Retighten all joints
•
Repeat test
•
If bubbles form again do not use the barbecue and contact your local distributor for assistance.
Always wipe the mixed solution (½ water and ½ liquid detergent / soap) from all joints and connections
after leak testing.
1. Maximum diameter or breadth is 315mm.
2. Maximum height (regulator included) is 700mm.
2
1