background image

27 

OUTBACK® WARRANTY 

 
 

OUTBACK® barbecues are warranted to the original purchaser against defects in materials 
and workmanship. OUTBACK® will supply replacements for defective parts free of charge 
provided that: 

 

♦ 

The product has not been used for trade, professional or hire purposes.

 

♦ 

The product has not been subjected to misuse or neglect, including fat fires and flare ups      
or use of a faulty or incorrect regulator.

 

♦ 

The product has not sustained damage through foreign objects, substances or accidents. 

 

♦ 

The care and maintenance instructions given in your OUTBACK® manual have been       
followed.

 

 
 
Any warranty and guarantee claims shall be rendered void in the event of improper use of the 
barbecue or the use of non-approved fuels. Discolouration, rusting or slight deformation of 
parts exposed directly to the flames (grill, griddle, flame tamer, burner, etc.) do not impair the 
function of the barbecue and do not form a basis for any claims. 
 
This warranty is offered as an extra benefit and is in addition to the customers’ statutory 
rights. 
 
OUTBACK® does not in any way warranty the gas cylinder. 
 
In the unlikely event that you experience problems with this barbecue, please fill in our 
warranty form at:  
 
http://www.outbackbarbecues.com/warranty-form  
 
One of our colleagues will be in contact with you shortly.

 

For reference and correspondence, record your 
serial number here. 
(See sticker on side of barbecue body.) 

Serial No.

__________________

 

This number may be required when ordering 
spare parts or accessories. A part reference 
number may also be required where applicable. 

HELPLINE NUMBER: 0345 388 6032 

Содержание EX200T




























Отзывы: