Outback Power Systems FLEXWARE FW-SP-250, Руководство пользователя

Страница: 6 / 22

The FLEXware Surge Protector Specifi cations
LEDs
• ACTIVE lights are yellow (power is present).
• ERROR lights are red (protection in that circuit is compromised, replacing the surge protector is
recommended).
• For the ERROR light to show, its circuit must be powered; its ACTIVE light will also glow.
Figure 3
: Surge Protector LEDs
LEDs
Figure 2
: Wiring designations
Each AC and DC wire is marked near the
terminal end of each wire.
Electrical Connections and LED Indicators
E
R
R
O
R
A
C
T
I
V
E
Mounting
• FW-SP-250 Mounts inside an FW250
• FW-SP-ACA Mounts on an FX
• FW-SP-R (REPLACEMENT) Mounts inside either the FW250 or the FW-ACA
5
Nominal Voltage Protection Maximum Energy Frequency Protection Protected
Voltage Level Surge Current Rating Type Circuit
120-240 VAC 390VAC 30kA per 2500 Joules 50/60 Hz Thermally 2AC
12-48 VDC 150 VDC circuit Fused MOV 1DC
DC
AC IN
AC OUT