Oursson MF3500D, Инструкция по эксплуатации

Страница: 5 / 16

5
PREPARATION REcOMMENDATIONS
Mode Action Indication Milk capacity Working time
F Heating
up to 60±5°С
Press ON/OFF button
once
button
will become red
min.100 ml-
max.160 ml
90-120 sec.
Foaming
Press ON/OFF button
thrice in 2 second
button
will become white
min.100 ml-
max.160 ml
60+-5 sec.
Heating
up to 60±5°С
Press ON/OFF button
twice in 2 second
button
will become blue
min.100 ml-
max.350 ml
120-160 sec.
Operation
Max.
Capacity,
ml.
Mode
Noz-
zle
Note
Milk foaming with heating 100
F
Heating
4
Use cold milk(10-15°С)
Use milk with < 3.0% fat.
Heating milk without foaming 200 Heating
5
Foaming milk without heating 100
Foaming
4
Preparing hot milk from water
and milk powder
150
F
Heating
5
For 150 ml of cold water
add 1 tbsp. of powder milk
Preparing hot cocoa 150
F
Heating
For 150 ml of cold milk
add 2 tbsp. of cocoa powder
Preparing cocktails 150
Foaming
4
Ex. recipe: 150 ml of coconut
milk whisk with 1-2 tbsp.
of raspberry syrup
Preparation of mulled wine, grog
and punches
150
F
Heating
5
Ex. recipe: 100 ml of dry red
wine mix and heat with 50 ml
of syrup for punches and mulled
wines
NOTE: In order to reduce the waiting time, rinse the container with cold water and wipe it dry.
To avoid overheating, the break between
cycles of operation should be 3 minutes. After
5-th cycle, the device will turn on automatic
protection, On/Off button won’t work for 5 min.
Cold milk foaming mode can’t be turned on
if milk heating is on. To turn on cold milk
foaming turn off the device, let the device
cool and follow the instructions.
Before first use
, wipe the body of the device with
a soft dry cloth. Other parts and inner surface wash
with warm water and some dishwashing detergent.
Dry. Wipe with clean dry cloth. Pic. E.
Before assembling and disassembling and/or
removing the nozzles, make sure the device is
unplugged.
O
rder of operation
,
Рiс. D
1. Select the nozzle and install it into the cooking
container on a special pin. Pic. D-1.
2. The mixing attachment is stored on the inside of the
cover. When using the attachement for mixing, the
whisk may be stored there too.
3. Fill the container with will up to a required level.
Pic. D-2.
4. Close the lid tightly. Pic. D-3.
5. Place the device onto the stand. Pic. D-4. Plug in the
device.
6. Press ON/OFF button as many time as required,
selecting the necessary program. Pic. D-5.
7. Turning off.
Press ON/OFF button once or wait till
the program is completed, then the device will turn
off by itself.