INSTALLATION GUIDE
Product code
SW
VB04-0040
11
VB04-0041
14
VB04-0042
18
VB04-0043
22
Ouneva Oy
Teollisuustie 21
FI-82730 Tuupovaara
Tel. +358 400 179 750
www.ounevagroup.fi
Finland
www.ounevaproducts.fi
Al/Cu 16-50 mm²
Product data
Product name
Voltage (Un)
Stripping length L
Conductor A
1 kV
35 mm
Al/Cu Shear-type splice sleeve 240-300 mm² 4-screw 1 kV
1 kV
65 mm
Copper conductors
Aluminium conductors
Supported IEC 60228 -conductors
Sector shaped cable
15.10.2021
Installation
Al/Cu Shear-type splice sleeve 70-95 mm² 4-screw 1 kV
1 kV
43 mm
Al/Cu 70-95 mm²
Al/Cu Shear-type splice sleeve 120-185 mm² 4-screw 1 kV
1 kV
53 mm
Al/Cu 120-185 mm²
Al/Cu Shear-type splice sleeve 16-50 mm² 4-screw 1 kV
Al/Cu 240-300 mm²
L
A
Strip the conductor to the stripping length L. Insert
conductor. Using protection grease is recommended in
wet conditions. You can install only one conductor to
the one connection space.
Brush the aluminium conductor surface with a wire
brush and lubricate lighly with grease in order to
prevent oxidation.
Sector shaped cable must be pre-rounded before
installation.
Pre-tighten the screws: First screw 1, make sure that the
cable does not move, then pre-tighten screw 2. Finally,
tighten the bolts until the stub breaks off. Remove any
sharp edges from the screw stem.
Screw 2
Screw 1
VB04-0040
VB04-0041
VB04-0042
VB04-0044
Pre-round the cable
Class 1 & 2 (solid and
stranded)
Max. 1 X CU / Conductor
space
Max. 1 X AL / Conductor space
Anti-corrosion paste: e.g.
Penetrox
Class 5 & 6 (fine stranded)
Using ferrule is
recommended
