6
GSMMOD11
GSM modem without GSM subscrition
SIM card:
GSM modem technical specifications
Dimensions (mm):
80.10 x 56.21 x 22.1 mm
Weight:
65 g
Operating temperature:
-30°C ... +85°C
Storing temperature:
-40°C ... +90°C
Operating voltage:
8 ... 30VDC
Rated current:
12V/200 mA, 24V&130mA
Warranty:
2 years
Optional accessories:
ANT1:
External antenna 900/1800MHz, with 2.5-meter cable.
CE-GSM10:
Antenna cable extension, 10 m
SIM card slot
Set the SIM card to SIM-slot that is in the side of the mo-
dem, so that circuit of the SIM-card is facing towards the
sticker that is on the top of the modem. Press the SIM-card
until the slot snaps and card is properly attached to slot.
The SIM-card can be removed by using a flat object such as
a screwdriver with flat-head.
To be able to use the SMS-connection, the PIN code has to
be installed in the controller. Note. The controller is given
the same PIN as that of the SIM card.
The SIM card’s PIN
query must be on.
Installation to the DIN rail
Use a DIN rail to fasten the modem into place. Attach the
DIN rail to the wall.The modem has a preattached plate
that can be attached to the DIN rail.
Place the upper edge of the plate above the upper edge
of the DIN rail.
Press the lower edge of the modem against the rail so
that the hooks on the lower edge of the plate become
attached to the rail.
A modem which is attached to
the wall, viewed from the back
DIN rail
Modem
DIN-rail
What does the LED indicate about modem status?
Orange LED
Modem state
Permanently off
Modem is in POWER DOWN mode
600ms on / 600ms off
Limited Network Service: No SIM card inserted or no PIN
entered, or network search in progress, or ongoing user
authentication, or network login in progress.
75ms on / 3s off
IDLE mode: The mobile is logged to the network (moni
-
toring control channels and user interactions). No call in
progress
75ms on / 75ms off / 75ms
on / 3s off
One or more GPRS contexts activated.
500ms on / 25 ms off
Packet switched data transfer in progress
Permanently on
Connected to remote party or exchange of parameters
while setting up or disconnecting a call.
Green LED indicates, if the modem in ON or OFF.
Orange LED indicates different states of the modem, that are listed below: