8
1. The modem must be turned on. DHCP on your computer must be enabled. If you have connected 4G-MOD2 to your
computer using an RJ-45 cable, open your browser and go to address 192.168.1.1. The 4G-MOD2 management
page opens. Type
admin
in the Username field, then
Ouman1324
in the Password field, and click login
Take the 4G connection into use
If you have acquired an Ouman 3G/4G connection, the modem is directly ready for use, when you have checked
operator’s APN address. Change APN address if necessary. Other modem settings can normally stay as they are. If
factory settings are for some reason lost, they can be restored back to Ouman-configuration (see page 3).
Operator
APN
Telia M2M (Ouman 3G-L3)
internet.telia.iot
Telia
internet
DNA (Ouman 3G-L2)
internet
Elisa
internet
Saunalahti
internet.saunalahti
DNA M2M
nat.iot.dna.fi
NOTE! Operator connection settings may
have changed since writing this manual. If
the internet connection does not work with
the above mentioned APN settings, check
the current settings from the operator.
4G-MOD2 technical information
Modem type
Teltonika RUT241
Operating voltage 9 - 30 VDC, <5W
Operating temp.
-40° … +75° C
SIM
Mini SIM 1.8V / 3.0V
Housing
Aluminium housing, plastic panels, DIN-rail mounting
Dimensions
83mm x 74mm x 25mm (without connectors)
Weight
125g
2. Next go to
Network ->Mobile -> General
2. Siirry kohtaan
Network ->Interfaces
3. In step 3, press the MOB1S1A1 edit button (Pen)
Tap on the APN field and enter your operator’s APN. For exam-
ple
”internet.telia.iot”, ”inter-net”, ”nat.iot.dna.fi”,
or
”internet.
saunalah-ti”. If your operator uses a different address, type it in
this field.
4. In the main view, press
“Save”:
2
3
3
2