6
NOTE! A red box box is displayed
”The
selected protocol needs a device assigned”
.
This notification does not need to be care.
11. Go to
General Setup
tab and go to
Protocol
and
click “
Unmanaged
”. Press
“Switch protocol”
. Save
by clicking
Save & Apply
.
12. Go to
Network -> Interfaces -> LAN
. Go to
Phy-
sical Settings
tab. Make selections as shown
in the picture. Save by clicking
Save & Apply.
13. Go to
Network -> LoadBalancing
.
Go to
Configuration
tab. Select
Policies
.
Click p1
”Edit”
button. Remove
m1
member by
pressing the red ”x”. Save by clicking
Save &
Apply.
