2
3. In the top menu bar, select System -> System
On System tab, change Timezone to Eu-
rope/Helsinki. Save by clicking
Save &
Apply.
1. To reset the modem to factory settings, press the RESET button at the end of the device with, for example, a par-
tially opened paper clip. The modem must be turned on.
2. DHCP on your computer must be enabled. If you have connected 3G-MOD3 to your computer using an RJ-45 ca-
ble, open your browser and go to address
192.168.1.1
. The 3G-MOD3 management page opens. Type
admin
in the
Username field, then
admin
in the Password field, and click ”log in”.
Changing connection settings:
If you have acquired an Ouman 3G connection, the modem is directly ready for use (Sonera, Elisa and DNA mobile
subscriptions). If you are using another operator’s subscription, APN address may need to be changed. In factory
configuration, modem’s APN is ”internet”. Check your own operator’s APN address and change if necessary (see sec-
tion 4 of the manual).
Other modem settings can normally stay as they are. If factory settings are for some reason lost, they can be re-
stored following the instructions below.
4. Go to System -> Administration
Under
Dropbear Instance
, change Inter-
face to “
lan
”. Scroll down to the bottom
of the page and save by clicking
Save &
Apply.