6
OPERATION, CONTINUED
Connect to an LTE Device
Turn on the phone or tablet and operate it as explained in the operating
instructions supplied with the mobile device.
• Plug the audio jack connector on the Revo NC2 for PoC speaker
mic into the earphone jack on your mobile device.
• Slide the ON/OFF switch to the ON position.
(Figure 2)
• Slide switch down to OFF to turn the unit off.
Once connected the Revo NC2 for PoC will:
1. Route the device’s audio output to the speaker mic.
2. Disable the device’s microphone and enable the
microphone of Revo NC2 for PoC.
Adjust the Speaker Volume
The Revo NC2 for PoC has two volume settings. Slide the switch up to
HI for high volume or down to LO for low volume.
Using the Noise-Canceling Microphone
The Revo NC2 provides excellent performance under a
wide range of conditions, including noisy environments.
• Push the push-to-talk (PTT) toggle button once
and release. (Figure 3)
• Speak directly into the microphone in the top fin
for best noise-canceling performance.
• Push the PTT toggle button again to release and
deactivate the microphone.
Figure 2
Figure 3
