Fastening the calf strap
1) Open all hook-and-loop closures.
2) Thread the calf strap through the eyelet on the foot plate (see fig. 34).
3) Guide the other end around the foot support holder (see fig. 35, item 1).
4) Adjust the length and fasten the hook-and-loop closure (see fig. 36).
Removing the calf strap
1) Open all hook-and-loop closures.
2) Remove the calf strap from the frame tube.
34
35
36
8.4 Seat and back upholstery
WARNING
Seat cushions and back support pads may ignite
Burns due to user error
►
The seat and back support upholstery as well as seat cushions, padding and covers fulfil the normative
requirements for flame resistance. However, they may still ignite if fire is handled improperly or negligently.
►
Keep away from all ignition sources, especially lit cigarettes.
CAUTION
Wear of the seat and back upholstery
Loss of functionality due to prohibited continued use
►
Have the seat and back upholstery replaced immediately in case of damage.
The product is equipped with seat and back upholstery. This ensures pressure relief during use of the wheelchair.
The seat upholstery and back support upholstery/back support pad can be removed from the wheelchair for clean
ing.
Removing the seat upholstery
1) Remove the Phillips head screws on each side (see fig. 37, item 1).
2) Remove the seat upholstery.
23
Start B2
Use
Содержание Start B2
Страница 1: ...Start B2 Instructions for use 3 ...
Страница 2: ...2 Start B2 ...
Страница 42: ...Start B2 42 ...