Otto Bock Nurmi Neo, Руководство по обслуживанию, Страница: 16 / 27

15
4.7 Reverse-roll Lock
Exchanging a Reverse-roll Lock
Press the lock (plastic piece) as far as possible
against the compression spring, until you can take
hold of the axle with water pipe pliers.
Loosen and remove the nuts from the axle and re-
move the axle with the lock from the posterior frame.
Pull down from the axle the compression spring and
the lock to be exchanged.
For re-assembly, please proceed in reverse order.
Use a new, self-locking nut.
Setting a Reverse-roll Lock
Set the axle of the reverse-roll lock so that the mand-
rel on the axle end (as shown here) is turned approx.
30° in the driving direction.
30°