Otto Bock Kimba Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 44

background image

85

86

7.3.3.4 Adjusting the head support position

The position of the head support can be adjusted using the wing nuts on the connecting bridge.
1)  Loosen the thumb screws (see fig. 87, no. 1).
2)  Adjust the position of the head support as needed.
3)  Tighten the thumb screws.
4)  Verify that the head support is firmly engaged.

87

7.4 Positioning belts

CAUTION

Incorrect belt settings

Injuries, malpositions, user discomfort due to incorrect routing of positioning belts

►

The positioning belts must be positioned close to the body. They must never be held away from the user's
body by components of the product or other parts.

►

Firmly tighten the positioning belts after they are applied. However, the comfort of the user must be taken into
consideration:

→

Excessively tight adjustment may lead to unnecessary pain or suffering for the user.

→

Adjusting the belt straps too loosely can cause them to shift up or down so that the user can slide into a
position that is dangerous to him/her.

→

The belt straps must not be twisted but must lie flat on the user’s body.

►

The shoulder belt must run over the user’s shoulder. If this is not possible, the user must not be transported in
this position in a motor vehicle.

7.4.1 Adjusting lap belts

The following adjustment tasks are described in more detail in the included instructions for use (user):
•

Adjusting the 2-point lap belt

•

Adjusting the four-point lap belt

35

Kimba

Settings

«
...
33
34
35
36
37
...
»

Содержание Kimba













































Отзывы:

Нет отзывов

Похожие инструкции для Kimba

ImageQuant LAS 4000

Бренд: GE Страницы: 86

Бренд: GE Страницы: 160

Бренд: GE Страницы: 134

Бренд: KaVo Страницы: 13

Бренд: vc999 Страницы: 52

Бренд: Abbott Страницы: 2

FreeStyle Libre

Бренд: Abbott Страницы: 3

Бренд: abc Страницы: 8

Бренд: ACE INSTRUMENTS Страницы: 15

Бренд: Wave Fitness Страницы: 15

Бренд: Farmet Страницы: 102

Бренд: Garmin Страницы: 2

Бренд: IDEAL Networks Страницы: 10

Бренд: Mackie Страницы: 34

Бренд: Mackworth Страницы: 38

Бренд: P&P Страницы: 6

Бренд: Omlet Страницы: 60

Бренд: Fagor Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды