Otto Bock Kimba KRUZE, Руководство пользователя

Страница: 11 / 27

11
control of the buggy and can take the weight of its occupant. During this operation, the attendants must be well
balanced and have secure grip on the buggy. The attendants hands must be inside the handle straps at all times.
Take rests in regular intervals. Do not lift the buggy holding the footrest.
going down steps - position the buggy squarely with the front wheels on the top step, tilt the handle backward and
push the buggy forward until the rear wheels are at the top step; the
additional attendants stands in front, steadies
and lowers the buggy by gripping the front frame; take the weight and lower the rear wheels down the step, contin-
ue step by step to the bottom.
going up steps - position the buggy squarely with the rear wheels against the bottom step, tilt the buggy backward
and raise to the next step; the
additional attendants stands in front, steadies and lifts the buggy by gripping the front
frame; continue step by step to the top.
6. SIZE AND FUNCTION ADJUSTMENT
Headrest extension – when extra head support is needed is available as standard equipment in size 38, 42 and
optionally can be taken off
Seat reinforcement
- you could increase or decrease the seat rigidity by adjustment of the seat reinforcement (see
PIC). Lengthen the belts of seat reinforcement to decrease the rigidity. Shorten the belts of seat reinforcement to
increase the rigidity. Never change the seat width by adjusting of the seat rigidity.
Seat angle adjustment - you can set 2 position of backrest angle by releasing and moving of the connecting screw
to second position. ( see PIC). If the second hole is occupied by transportation pin, exchange the positions.