Otto Bock Invader 480S26 10000 K, Инструкция по эксплуатации

Страница: 30 / 48

48 49
Drive wheels with lock-release assist
The quick-release axle with lock-release assist for people with quadriplegia makes it possible to install the drive
wheels even in case of severely limited mobility of the arms and hands.
1) Open the lock-release assist according to the handle position (see fig. 50: locked – handle is parallel to wheel
hub; see fig. 51: unlocked – handle is perpendicular to wheel hub). The lock is released when the handle is
positioned horizontally (90° position).
2) Pull off/push on the drive wheel.
3) Close the lock-release assist (see fig. 50: locked – handle is parallel to wheel hub; see fig. 51: unlocked –
handle is perpendicular to wheel hub).
INFORMATION: The wheels must fit in to the wheel attachment device without there being any play
after closure.
50 51
9.9 Caster wheels and caster forks
WARNING
Failure of caster wheels or caster forks
Falling, severe injury due to the wheelchair tipping over
► Regularly inspect the caster wheels and caster forks for damage.
►
Regularly clean and oil the caster wheel axles and the threaded axles on the caster forks, especially in case of
stiffness.
► Inform the responsible qualified personnel in case of permanent changes to the driving characteristics.
CAUTION
Incorrect caster wheel position when leaning forward in the wheelchair
Tipping over, falling due to incorrect caster wheel positioning
► Prior to activities that require you to bend forward in the wheelchair (e.g. tying your shoes), maximise the sta­
bility of the wheelchair.
►
In order to do so, push the wheelchair backwards until the caster wheels turn forward.
30
Use
Invader 480S26=10000_K