2) Fold the push handle down by
90°
(see fig. 44).
CAUTION! Make sure the fingers are not pinched between the push handle and back support.
Unfolding the push handles
1) Fold the push handle up by
90°
(see fig. 44).
2) When the active pushing position is reached, you can hear the push handle engage.
43
44
9.7.2 Adjusting the height of the push handles
The height of the telescoping push handles can be adjusted in order to make pushing easier for the attendant.
1) Release the clamping lever.
2) Adjust the height of the push handle.
3) Close the clamping lever tightly.
INFORMATION: Both push handles must be adjusted to the same height.
45
9.8 Drive wheels
WARNING
Improper assembly of removable wheels
Tipping, falling over of the user due to wheels coming off
►
After each assembly, verify the proper fit of the removable wheels. The quick-release axles must be firmly
locked in the wheel attachment.
WARNING
Defective tyres
Accidents/falling due to poor traction, reduced braking force or lack of manoeuvrability
►
Maintain sufficient tyre pressure. Note the information in the section "Technical data" or on the tyre sidewall.
►
Ensure that the pressure is the same in both tyres.
►
Ensure that the tyres have sufficient tread depth.
28
Use
Invader 480S26=10000_K
Содержание Invader 480S26 10000 K
Страница 1: ...Invader 480S26 10000_K Instructions for use 3...
Страница 2: ...2 Invader 480S26 10000_K...
Страница 45: ...45 Invader 480S26 10000_K...
Страница 46: ...Invader 480S26 10000_K 46...