Otto Bock Invader 480S26 10000 K, Инструкция по эксплуатации

Страница: 44 / 48

Temperatures and relative humidity
Transport and storage temperature [°C (°F)] -10 to +40 (14 to 104)
Relative humidity [%] 45 to 85; non-condensing
14 Appendices
14.1 Threshold values for wheelchairs transportable by train
INFORMATION
►
The products in this series fully satisfy the minimum technical requirements of regulation (EU) No. 1300/2014
regarding train accessibility for people with disabilities. However, not all versions can comply with all
threshold values due to different settings.
► With the help of the table that follows, you or the qualified personnel can take measurements and verify wheth­
er the specific product in question meets the threshold values.
Feature Threshold value (according to Directive (EU)
No. 1300/2014)
Length [mm] 1200 (plus 50 mm for the feet)
Width [mm] 700 (plus 50 mm on each side for the hands when mov­
ing)
Smallest wheels ["] approx. 3 or greater (according to the directive, the
smallest wheel must be able to overcome a gap measur­
ing 75 mm horizontally and 50 mm vertically)
Height [mm] max. 1375; including a 1.84 m large male wheelchair
user (95th percentile)
Turning radius [mm] 1500
Maximum weight [kg] 200 (for wheelchair and user, including any baggage)
Maximum obstacle height that can be overcome [mm] 50
Ground clearance [mm] 60 (at an upward slope angle of 10°, ground clearance
must measure at least 60 mm under the footrest for
going forward at the end of the slope)
Maximum inclination angle on which the wheelchair will
remain stable [°] 6 (dynamic stability in all directions)
9 (static stability in all directions, also when wheel lock
engaged)
14.2 Required tools
The following tools are required for adjustments and maintenance work:
•
Allen wrenches in sizes 3, 4, 5, 6
• Ring and open-ended wrenches in sizes 8, 10 and 13
• Phillips screwdrivers PH or PZ size 0, 1, 2
• Screwdriver (blade width: 2.5 mm)
14.3 Torque values of the screw connections
Unless otherwise specified, screw connections are tightened with the following torque values:
•
Thread diameter M4: 3 Nm
• Thread diameter M5: 5 Nm
• Thread diameter M6: 10 Nm
• Thread diameter M8: 25 Nm
• Thread diameter M10: 50 Nm
• Thread diameter M12: 85 Nm
44
Appendices
Invader 480S26=10000_K