Otto Bock iFab EasyScan, Быстрый старт

Страница: 5 / 6

Review, cropping and finish a scan
•
When the object has been captured completely, review the scan result clicking on “Pause scan”. In case of
uncaptured areas you can return to scanning mode and complete the scan
•
Crop areas out of interest using the cropping tool in this section. Open the tool with the icon in the top left
corner. Draw a line between the area remaining after cropping and the area to be cropped away. Invert the
direction of the cropping area if necessary. When satisfied with the selection apply the cropping
•
ee
•
Save the scan to the job list with “Finish Scan”. Note: Cropping cannot be undone after this point
Complete the job and upload
•
The completed job can be found in the job list waiting for fina-
lization. Start finalization with the button . During this step
the upload package is created. After finalization upload the
job package to the iCC with the button . From there you can
access the scan file
•
Uploaded jobs are moved into the archive. Jobs can be moved
back to the job list by clicking on the three dots
Access the scan file
•
To access the scan file, switch to the iCC either through the
menu in the top left corner of the application or access the web-
site www.ifab-customer-center.com
•
Go to the “Scan List” which can be found in the header under
your name
•
Select the scan to be downloaded. Review the scan in 3D-view.
Start the download via the download icon and choose the
the file type of the 3D scan
•
The scan will be downloaded to the directory on the local
machine as a zip package. Unpack the zip package to use the
3D file for further processing
11