Otto Bock HR24160000, Инструкция по эксплуатации, Страница: 11 / 26

11
CAUTION
Risk of injury as a result the grip bar sliding off. The grip bar must always be locked by closing the
j x
(Fig. 9) on both sides.
The depth of the grip bar must be set so that the anterior edge of the grips on the grip bar lies
behind the caster swivel lock housings by the length of
A
. When using channel forearm sup-
ports, the anterior edge of the supports must lie behind the caster swivel lock housings by the
length of
A
.
Minimal length of A when using.... With Nurmi-
Neo, size 1 With Nurmi-
Neo, size 2 With Nurmi-
Neo, size 3
...standard grip bar... 11 cm
,
4.3"
5 cm
,
5.9"
9 cm
,
7.5"
...grip bar with universal grips... 11 cm
,
4.3"
5 cm
, 5.9"
9 cm
,
7.5"
...mini grip bar... 11 cm
, 4.3"
5 cm
,
5.9"
9 cm
,
7.5"
supports...
18 cm
,
7.1" 2
0 cm
,
7.9" 2
2 cm
,
8.7"
It is best to check this (Fig. 10) by placing the caster swivel lock housings of the Nurmi Neo
against a smooth door and measuring the space from the door's surface to the grip or forearm
support.
For this check, the entire caster swivel lock housings must be slid onto the front frame and the
casters turned to the side.
9 10
A
CAUTION
Risk of tipping after height adjustment of the grip bar. 5
the grip bar depth must be checked and corrected, if necessary. Otherwise the walker may tip over
forwards