Otto Bock Genium 3B1-2, Инструкция по эксплуатации

Страница: 93 / 480

93
INFORMATION
If the
Volume
parameter is set to '0' in the Cockpit app or using the remote control, there are
no beep signals (see Page 76).
Beep signal Vibration
signal Additional action per­
formed Event
1x short 1x short Mode switching using the
Cockpit app or remote con­
trol Mode switching performed using
the Cockpit app or remote con­
trol.
1x long 1x long Bouncing on the forefoot fol­
lowed by unloading the
prosthetic leg Bouncing pattern recognised.
1x short 1x short Weight taken off prosthetic
leg and leg kept still for 1
second Switching to basic mode
(mode 1) carried out.
2x short 2x short Weight taken off prosthetic
leg and leg kept still for 1
second Switching to MyMode 1 (mode 2)
carried out.
3x short 3x short Weight taken off prosthetic
leg and leg kept still for 1
second Switching to MyMode 2 (mode 3)
carried out.
17.2.2 Warnings/error signals
Error during use
Beep signal Vibration signal Event Required action
1x long at intervals of
approx. 5 seconds (if
mute mode (silent
mode) is activated,
this signal is not gen­
erated) Overheated hydraulic
unit Reduce activity.
3x long Battery charge level
under 25% Charge battery soon.
Remaining operating time
approx. 24 hours
5x long Battery charge level
under 10% Charge battery soon
Remaining operating time
approx. 6 hours
5x long 5 x long repeated
every 60 seconds Moderately severe
error/indication of
safety mode activa­
tion
e.g. a sensor is not
operational
Switch to safety
mode (see Page 86).
Restricted walking pos­
sible. The change in flex­
ion resistance has to be
noted.
The product must be
inspected immediately by
an O&P professional.