Otto Bock Blizzard, Руководство по обслуживанию

Страница: 12 / 40

0
4.1.4. Retrofit / Replacement of the Crutch Holder
First proceed as described in section 4...: Remove the rear wheels and the U-shaped
profile from the rear wheel adapter.
Slide the pre-assembled crutch holder onto the rear wheel axle, which is now freely acces-
sible, past the rear wheel adapter, until the (hexagonal) attachment of the crutch holder is
located on the hexagon of the axle (Fig. 8).
Fix the crutch holder using the clamping screw.
Reinstall the rear wheel attachment and attach the wheels by repeating the steps described
above in the reverse sequence.
Attach the hook and loop strap for guidance of the crutches to the back tube.
To replace the bucket, loosen the screw connection on the bottom and remove the bucket
(Fig. ). Attach a new bucket and fix it using the previously removed screws.
Figure
Figure 8
647G429_Blizzard_Inhalt GB.indd 10 05.04.2007 12:35:27 Uhr