Otto Bock B500 plus, Инструкция по эксплуатации

Страница: 19 / 28

Ottobock | 19 B500 plus
Handover
Fig. 4 Front (left) and rear (right) eyebolts
7.3 Handing over the product
WARNING
Lack of instruction
Risk of falling, tipping over due to lack of knowledge
►
Instruct the user or the attendant in the proper use of
the product when handing it over.
The following steps must be performed for the safe han­
dover of the product:
•
Have the user get into the product and perform a trial
seat fitting. Pay special attention to proper positioning
according to medical considerations.
• The user and any attendants must be instructed in the
safe use of the product. In particular, the enclosed
instructions for use (user) are to be used.
• The instructions for use (user) must be issued to the
user or an attendant during handover of the wheelchair.
• The user or attendant should acknowledge that they
have been instructed in how to use the product and
were informed of the residual risks.
8 Maintenance / repair
The manufacturer recommends regular maintenance of the
product every
12 months .
The instructions for use (user) contain further information on
cleaning/disinfection as well as maintenance/repair by the
user.
Detailed
information on repairs and program­
ming/troubleshooting of the control unit can be found in the
service manual.
9 Disposal
9.1 Disposal Information
NOTICE
Disposal of batteries
Pollution due to incorrect disposal
► Observe the information printed on the batteries by the
manufacturer.